|
Motherboard
|
Super X10DGQ
|
|
CPU
|
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP) *
|
|
Dual Socket R3 (LGA 2011)
|
|
Cores / Cache
|
Up to 22 Cores / Up to 55MB Cache
|
|
System Bus
|
QPI up to 9.6 GT/s
|
|
Note
|
BIOS version 2.0 or above is required
|
|
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
GPU
|
4 Nvidia Tesla P100 SXM2
|
|
NVLINK up to 80GB/s
|
|
Memory Capacity
|
16x 288-pin DDR4 DIMM slots
|
|
Up to 512GB ECC 3DS LRDIMM, 1TB ECC RDIMM
|
|
Memory Type
|
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
|
DIMM Sizes
|
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
|
|
LRDIMM: 32GB
|
|
Memory Voltage
|
1.2 V
|
|
Error Detection
|
Corrects single-bit errors
|
|
Chipset
|
Intel C612 chipset
|
|
SATA
|
SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
|
IPMI
|
Support for Intelligent Platform Management Interface v.2.0
|
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
|
ASPEED AST2400 BMC
|
|
Network Controllers
|
Intel i350 Dual Port Gigabit Ethernet
|
|
Virtual Machine Device Queues reduce I/O overhead
|
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
|
Graphics
|
ASPEED AST2400 BMC
|
|
SATA
|
6 SATA3 (6Gbps) ports
|
|
LAN
|
2 RJ45 Gigabit Ethernet ports
|
|
1 RJ45 Dedicated IPMI LAN port
|
|
USB
|
2 USB 3.0 ports (2 via headers)
|
|
Video
|
1 VGA Connector
|
|
Serial Port
|
1 Serial header
|
|
BIOS Type
|
128Mb SPI Flash EEPROM with AMI BIOS
|
|
BIOS Features
|
Plug and Play (PnP)
|
|
APM 1.2
|
|
DMI 2.3
|
|
PCI 2.3
|
|
ACPI 1.0 / 2.0 / 3.0
|
|
USB Keyboard support
|
|
SMBIOS 2.7.1
|
|
UEFI
|
|
Form Factor
|
1U Rackmount
|
|
Chassis
|
CSE-118GQP-R2K05B
|
|
Height
|
1.7" (43mm)
|
|
Width
|
17.2" (437mm)
|
|
Depth
|
35.2" (894mm)
|
|
39.3" (997mm) with rails
|
|
Package
|
24" (H) x 8" (W) x 46" (D)
|
|
Weight
|
Net Weight: 45 lbs (15.9 kg)
|
|
Gross Weight: 58 lbs (21.8 kg)
|
|
Available Color
|
Black
|
|
Buttons
|
Power On/Off button
|
|
System Reset button
|
|
LEDs
|
Power LED
|
|
Hard drive activity LED
|
|
2 Network activity LEDs
|
|
System Overheat LED / Fan fail LED /
|
|
UID LED
|
|
PCI-Express
|
3 PCI-E 3.0 x16 slots
|
|
1 PCI-E 3.0 x8 low-profile slot
|
|
Hot-swap
|
2x 2.5" Hot-swap drive bays
|
|
Fixed
|
2x 2.5" internal drive bays
|
|
Fans
|
7x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control
|
|
Power Supply
|
2000W Redundant Power Supplies with PMBus
|
|
Total Output Power
|
1000W/1800W/1980W/2000W
|
|
Dimension
|
73.5 x 40 x 265 mm
|
|
Input
|
100-120Vac / 12.5-9.5A / 50-60Hz
|
|
200-220Vac / 10-9.5A / 50-60Hz
|
|
220-230Vac / 10-9.8A / 50-60Hz
|
|
230-240Vac / 10-9.8A / 50-60Hz
|
|
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
|
+12V
|
Max: 83.3A / Min: 0A (100-120Vac)
|
|
Max: 150A / Min: 0A (200-220Vac)
|
|
Max: 165A / Min: 0A (220-230Vac)
|
|
Max: 166.7A / Min: 0A (230-240Vac)
|
|
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
|
12Vsb
|
Max: 2.1A / Min: 0A
|
|
Output Type
|
25 Pairs Gold Finger Connector
|
|
CPU
|
Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
|
|
5 Phase-switching voltage regulator
|
|
FAN
|
Total of seven 4-pin PWM fans
|
|
7 fans with tachometer monitoring
|
|
Status monitor for speed control
|
|
Status monitor for on/off control
|
|
Low noise fan speed control
|
|
Temperature
|
Monitoring for CPU and chassis environment
|
|
CPU thermal trip support
|
|
Thermal Control for 8 Fan Connectors
|
|
PSU I2C temperature sensing logic
|
|
Thermal Monitor 2 (TM2) support
|
|
PECI
|
|
LED
|
Power Fail / Overheat LED
|
|
Suspend-state Indicator LED
|
|
UID LED
|
|
Other Features
|
SDDC Support
|
|
RoHS
|
RoHS Compliant
|
|
Environmental Spec.
|
Operating Temperature:
|
|
10°C to 30°C (50°F to 86°F)
|
|
Non-operating Temperature:
|
|
-40°C to 70°C (-40°F to 158°F)
|
|
Operating Relative Humidity:
|
|
8% to 90% (non-condensing)
|
|
Non-operating Relative Humidity:
|
|
5% to 95% (non-condensing)
|
Под заказ
Информация об оплате
В корзину
